A conductive and/or dissipative ESD floor is one of the most important elements in the construction and operation of an EPA area. Nowadays there are many offers of anti-static flooring. As a rule, ESD protection features are achieved by adding conductive components to an ordinary or common industrial or commercial surface. In this case, it is extremely crucial to observe that this technology often fails to achieve the right proportion since manufacturers are not properly mixed normal and conductive components.

Such manufacturers often offer good antistatic surfaces with the help of inappropriate documents or even ask to trust their reputation.

If your company plans to implement ESD protection surfaces in an enormous area, you must make sure that it is your choice. This becomes even more important if you put very sensitive, sophisticated and expensive equipment in this area.

To prove that this surface meets the requirements of the standard, it is necessary to use specialized and certified equipment to measure its resistivity, and it is required an in-depth knowledge of how to correctly measure that area.

We offer the anti-static floor measurement service according to the international standards ESD S 20.20, IEC 61340-4-1 and IEC 61340-5-1.

During these measurements, we tested that it is according to the international standard and if it does not then give recommendations as correct non-conformities (as much as possible) and how to connect the Earth to the ground.